ATMega8 Features
Advanced RISC Architecture
- 130 Powerful Instructions - Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Up to 6 MIPS Throughput at 16MHz
- Fully Static Operation
- On-chip 2-cycle Multiplier
Nonvolatile Program and Data Memories
- 8k Bytes of In-System Self-Programmable Flash
- Optional Boot Code Section with Independent Lock Bits
- 512K Bytes EEPROM
- Programming Lock for Software Security
- 1K Byte Internal SRAM
Peripheral Features
- On-chip Analog Comparator
- Programmable Watchdog Timer with Seperate On-chip Oscillator
- Master/Slave SPI Serial Interface
- Two 8-bit Timer/Counters with Separate Prescalar, Compare
- One 16-bit TImer/Counter with Seperate Prescaler, Compare and Capture mode
- Real TIme Counter with Seperate Oscillator
- Three PWM Channels
- 8-channel ADC in TQFP and MLF package
- 6-channel ADC in PDIP package
- Byte-oriented Two-wire Serial Interface
- Programmable Serial USART
Special Mircocontroller Features
- Power-on Reset and Programmable Brown-out Detection
- Internal Calibrated RC Oscillator
- External and Internal Interrupt Sources
- Five Sleep Modes: Idle, ADCNoise Reduction, Power-save, Power-down and Standby
I/O and Packages
- 23 Programmable I/O Lines
- 28-lead PDIP, 32-lead TQFP, 32-pad MLF
Operating Voltages
- 4.5-5.5V for ATmega8
Speed Grades
- 0-16 MHz for ATmega8
Power Consumption at 4 Mhz, 3V, 35 °C
- Active: 3.6mA
- Idle Mode: 10mA
- Power-down Mode: 0.5 µA
0 comments:
Post a Comment